Biete hier 2 meiner Motoren welche Arbeitslos sind bei mir.
Scorpion HK 4035 mit 560kv.Der Motor ist Ideal für 10-12S und macht richtig Balett
Der Motor hat neue Lager bekommen und tut seinen Job super.
https://www.dropbox.com/s/w1tondwxfzmqh5v/Foto%201.JPG
Specifications
Stator Diameter
40 mm (1.56 in)
Stator Thickness
35 mm (1.024 in)
No. of Stator Arms
12
Magnet Poles
10
Motor Wind
8 Turn Delta
Motor Wire
26-Strand 0.29mm
Motor Kv
560KV RPM/Volt
No-Load Current (IO)
2.1 Amps @ 8.4v
Motor Resistance (RM)
0.012 Ohms
Max Continuous Current
100 Amps
Max Continuous Power
4200 Watts
Weight
444 Grams (15.61 oz)
Outside Diameter
48.9 mm (1.9 in)
Shaft Diameter
5.98 mm (0.235 in)
Body Length
61.5 mm (2.38 in)
Overall Shaft Length
94.7 mm (3.73 in)
Max Lipo Cell
12s
Motor Timing
5deg
Drive Frequency
8kHz
FP 50€
Dann habe ich hier noch einen Scorpion HK 2221-8.Der Motor für Helis der 450er Klasse.
Der Motor wurde Neugelagert und tut was er soll
https://www.dropbox.com/s/5abc3yzkg4ugetg/Foto%202.JPG
Specifications
Stator Diameter
22.0 mm (0.87 in)
Stator Thickness
21.0 mm (0.83 in)
No. of Stator Arms
9
Magnet Poles
6
Motor Wind
8 Turn Delta
Motor Wire
16-Strand 0.21mm
Motor Kv
3595 RPM / Volt
No-Load Current (Io)
2.31 Amps @ 10 volts
Motor Resistance (Rm)
0.024 Ohms
Max Continuous Current
45 Amps
Max Continuous Power
475 Watts
Weight
81 Grams (2.86 oz)
Outside Diameter
27.9 mm (1.098 in)
Shaft Diameter
3.17 mm (0.125 in)
Body Length
38.3 mm (1.508 in)
Overall Shaft Length
58.7 mm (2.311 in)
Max Lipo Cell
3s
Motor Timing
5deg
Drive Frequency
8kHz
FP 20€